Card Edge電源+信號連接器，沉板式類型大大降低高度空間.
Low Profile Hybrid Power Connectors
產品運用與優點
(Product application and advantages )
產品適用于工作站，工業控制器，電力供應，路由器，以及交換機等。
(Products are suitable for Workstations, Industrial Controllers，Power Supplies ，Routers and Switches etc. )
這不是該產品的應用程序的最終列表。它代表了一些比較常見的用途。
This is not a definitive list of applications for this product. It represents some of the more common uses.
產品優點有如下幾點 (The advantages of the product are as follows)
1.1產品可與 OUPIIN 標準 LPH 插頭或行業標準 1.60 毫米印刷電路板金手指卡相插配。
The product can be matched with the OUPIIN standard LPH plug or the industry standard 1.6mm printed circuit gold finger side
1.2 產品采用沉入PCB板中形式,從而可顯著減小產品在機盒內上下空間
The product is submergence of the PCB, which can significantly reduce the product’s
upper and lower space in the shell.
1.3設有電流中斷額定值，符合熱插入要求
Current interruption rating,in line with hot pluggable requirements.
1.4信號和電源觸點堅固耐用，可有效減少被碰到或損壞的可能性．
The contact point of signal and power supply is strong and durable, which can effectively reduce the possibility of being touched or damaged.
1.5每個外殼隔間（頂端和底端）內設有兩個獨立電源刀片，可令一個隔間內同時設有電源和返回電路，每個電源架提供 60.0A 的總電流．
Each shell compartment (top and bottom end) is equipped with two independent power blades,which provide a power supply and return circuit in one compartment, and each power rack provides the total current of 60A.
通流測試 Current Rating Test
封裝PCBLayout
Low Profile Hybrid Power Receptacle (P/N)
總結(Summary )
該連接器產品是一種混合型、高電流的電源及信號連接器系統，可有效彌補傳統連接器的不足之處。由于采用平行于電路板的電源刀片設計，它的高度很低，允許更大的系統氣流通過，與額定電流相同的傳統連接器相比，可減少大部分占用空間。
The connector product is a hybrid, high current power supply and signal connector system, which can effectively make up for the shortcomings of the traditional connector. Because of the design of power supply blades parallel to the circuit board, it’s very low, allowing larger system air flow to pass. Compared with the traditional connector with the same rated current, it can reduce most of the occupied space.
作為新一代電源互連產品，每個外殼隔間內設有兩個獨立電源刀片，可進行共面方向的插配。 Low Profile Hybrid Power Receptacle可在傳統的兩片式連接器系統中進行插配，或用作連接板側邊/母線應用的單件式插座。
As a new generation of power interconnect products, each shell has two independent power supply blades, which can be inserted in the coplanar direction. Low Profile Hybrid Power Receptacle can be inserted in the traditional two piece connector system, or it can be used as a single piece socket for side panel / busbar application.
